Lake County Sheriff's Office

The camera is powered on and continuously capturing video in a temporary buffer. This mode enables pre-event recording.

•  Recording (Event) –

Camera is recording

To power on the AB4 camera:

• Press and hold the Power button until you feel a short vibration
• The camera will emit two short – rising pitch tones and a long vibration
• The camera enters Ready (buffering) mode

While in Ready mode:

• The camera display shows READY
• The Operation LED (top of the camera) blinks green
• The camera captures video continuously but does not save it unless recording begins.

                🛈 Buffered footage is automatically saved when an event is triggered.

To begin active recording:

• Double tap the Event button.
• The camera:
  1. Emits two short tones and two short vibrations.
  2. Displays STARTING and then the recording icon
  3. The Operation LED on the camera blinks red

• Every 2 minutes the camera will emit two short tones and two short vibrations as a recording reminder

To stop recording:

• Press and hold the Event button for 3 seconds
• The camera will emit a long tone and vibrate
• The camera returns to Ready (buffering) Mode.

Reference: https://my.axon.com/s/article/Operate-your-camera-AB4